1 FXS GPON ONT
SGN8605V GPON ONT: The SGN8605V is an ITU-T G.984.x based GPON ONT that supports 2.5G downstream and 1.25G upstream bandwidth. It offers 1*Gigabit, 1*100Mbps and 1*FXS ports for Internet and Voice outputs. The SGN8605V supports full Home Gateway features, such as Multiple WAN connections, VLAN, QOS, etc. It is a GPON ONT for ISPs integrating high speed Internet and high quality Voice services over single fiberChat Now
SGN8605V GPON ONT:
The SGN8605V is an ITU-T G.984.x based GPON ONT that supports 2.5G downstream and 1.25G upstream bandwidth. It offers 1*Gigabit, 1*100Mbps and 1*FXS ports for Internet and Voice outputs. The SGN8605V supports full Home Gateway features, such as Multiple WAN connections, VLAN, QOS, etc. It is a GPON ONT for ISPs integrating high speed Internet and high quality Voice services over single fiber.
Fully complies with ITU-T G.984.x GPON standard, compatible with Huawei, ZTE, Fiberhome, CHIMA GPON OLTs. Offers 1 GPON WAN Port, support 1.25G upstream and 2.5G downstream
Offers 1GE+1FE LAN Ports, can be configured in Route or Bridge mode Offers 1 FXS ports for deploying VoIP phone services.
Max 1:128 Fiber ration, max transmission distance can reach 35km
Multiple WAN connections, offers different services on different LAN ports.
Support AES 128-bit encrypted and key switching, enhancing transmission security
Support 40 Tconts and 256 GEM Port IDs, enabling multiple services on a single Subscriber CPE.
Support FEC (Forward Error Correction), ensures high reliable and precise data transmission
Support Dynamic Bandwidth Allocation (DBA), Smarter bandwidth assignment and usage.
L2 Switching and L3/4 Home Gateway/CPE features with hardware NAT
Supports IEEE802.1Q VLAN and 802.1P QOS, classify and prioritize services for you.
Support OMCI and TR069 Management, manage subscribers remotely.
Supports IPv4 and IPv6, highly applicable in both IP type based networks.
ITU-T G.984.x GPON compliant, Class B+ 2*10 SFF GPON transceiver, SC/APC 1310nm upstream & 1490nm downstream Support G.984.1 General Characteristics
Support G.984.2 Physical Media Dependent (PMD) layer Specification Support G.984.3 Transmission convergence layer Specification
GPON transceiver sending power: 0.5-5dbm, receiving sensitivity: -27dbm
Transmission wavelength: Upstream: 1310nm / Downstream: 1490nm
Support 1:128 Fiber Optic Ratio at 35km transmission distance.
Fiber Transmission cable: G.652 Single mode optical fiber cable
Configurable AES decryption on downstream payload.
Configurable FEC on both upstream and downstream payloads.
Multi-Application Processor queues for dedicated connections for in-band.
Enhanced GPON debug and diagnostic functions.
Support up to 40 Transmission Container (T-Cons)
Support 256 bidirectional GEM Port IDs
Support NSR/SR Dynamic Bandwidth Allocation (DBA)
Support Forward Error Correction (FEC)
Maximum 2.488 Gbps Downlink/1.244 Gbps Uplink Support Dying Gasp
IEEE802.1P QOS, DSCP, TOS:
SP, WRR, SP+WRR dispatching Algorithm Source & DST-MAC based QOS VLAN ID, Vlan Priority based QOS Source DST-IP based QOS
Home Gateway/CPE Features
Multi-WAN, support up to 8 WAN connections Support Route and/or Bridged WAN
Port Binding, Data/VoIP/IPTV services can be bound to different LAN ports Configurable VLAN ID for each WAN Configurable QOS queues for each WAN Multi-services bound to the same WAN
MAC Learning, 4K MAC address table
Bridged or Route network mode
Support RIP v1, v2 for routing
Static Route, Dynamic Rout, DNS Proxy,
IPv4 & IPv6 TCP, UDP, RTP, SNTP, NAT, DHCP, DNS IEEE802.1Q VLAN, Port VLAN
IEEE802.1x, MAC, IP, or TCP/UDP based ACLs Port Bandwidth Control, IEEE802.3x flow control Storm Control: Broadcast/Multicast/unknown unicast, ARP
Port Isolation, Port Mirror, Auto MDI/MDIX IEEE802.1d STP, Port Loop detection IGMP v2, v3 & IGMP Snooping for IPv4 MLD v2, v3 & MLD Snooping for IPv6
Offers 1 FXS port for Phone connection
SIP V1, V2 (RFC3261, RFC3262, RFC3264, RFC3265)
SIP & H.248, support registering 1 SIP account
G.711, G.723.1, G.729A-8kbps, G.726, G.722, ILBC voice codecs DTMF Tone Detection, DTMF Tone Relay
Multiple Calling Tone, FSK Caller ID Calling line Identification Presentation Calling line Identification Restriction
Call forwarding, call transfer, call hold, three-way conference, etc
QOS and TOS to ensure voice packets pass through in priority
Support RFC62 Echo protocol,
Support T.38 Fax Machine
Support Digital Map configuration
Hardware Parameters & Interfaces:
Built on BCM68385 SOC, Dual Core CPU @ 240Mhz CPU covered with cooling unit, support Hardware NAT. 16-bit DDR3 SDRAM, come with a 512Mb DDR3 SDRAM Nand Flash, come with a 1Gb Nand Flash
1*GPON SC Port, 2.5G downstream, 1.25G Upstream 1* 10/100/1000Base-Tx Gigabit Ethernet Port 1* 10/100Base-Tx Fast Ethernet Port
SGN8605V Application Diagram
Interoperable GPON OLT Models
CHIMA SNA8800, SNA9000T series Huawei MA5680T, MA5683T OLTs ZTE C200, C220, C300 series OLTs Fiberhome AN5516 OLT
Serial interface maintenance using UART Web UI Management OMCI & NMS Management
CLI command line management FTP/TFTP/HTTP Auto Provision Management TR069 ACS management
1 FXS port, support analog phones and T.38 fax machine. IEEE802.3x flow control Full duplex and half duplex LED Indications: Power, PON, LOS, GE, FE, VoIP 1*Reset button
External Power Supply: DC 12V, 1A Desktop design, Plastic housing
IEEE 802.3,IEEE 802.3u, IEEE 802.3ab, IEEE802.1Q, IEEE802.1P, IEEE802.1D, ITU-T G.984.1,
ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4, RFC3261, RFC3262, RFC3264, RFC3265
1 GPON SC Uplink port, Upstream: 1.25Gbs / Downstream: 2.5Gbps
GPON Transmission Distance
Up to 35Km
1*10/100/1000Base-Tx Gigabit LAN + 1*10/100Base-Tx Fast Ethernet LAN ports
1 RJ11 FXS Ports
Power, PON signal, Los alarm, Phone 1, LAN1, LAN2
10Base-Tx: UTP category 3, 4,5, up to 100m
100Base-Tx: UTP category 5, up to 100m
1000Base-Tx: UTP category 5, 5E, 6, up to 100m
8.3μm, 8.7μm, 9μm and 10μm single mode fiber cable
AC 96-260V, DC 12V, 1A, External Power Supply
0℃ - 45℃
10% - 90%
-40℃ - 70℃
5% - 90% RH
1GE+1FE+1FXS GPON ONT
1GE+1FE GPON ONT
1GE GPON ONT