Web Smart Gigabit Switch 8 Ports
The STE-2208-GW is a managed gigabit switch that offers 8 10/100/1000 gigabit ethernet ports.It comes with rich web management features, such as port bandwidth control, port mirroring, 802.1q VLAN, 802.1P QOS, etc
STE-2208-GW 8 Port Gigabit Websmart Switch Description:
The STE-2208-GW is a Websmart gigabit switch that provides 8 Port 10/100/1000Base-Tx Auto-Negotiation and it supports Auto MDI/MDIX. The 8 port gigabit switch also supports Web management , which it provides intelligent configurations such as port mirroring, Port Base/Tag VLAN,Trunk,static MAC address table,QoS,port security and port traffic statistics.
Offering IEEE802.3x, the STE-2208-GW supports full-duplex flow control and half-duplex backpressure.
Providing a backplane of up to 16Gbps, the 8 port gigabit switch offers non-blocking wire-speed forwarding. The 8 port websmart gigabit switch adopts store-and-forward switching method and it integrates the 8K MAC address table to fully meet diversified applications . With a mini 9 inch rack design, the STE-2208-GW can be an ideal option for Internet cafes, medium/small enterprises and intelligent community network.
> Complies with IEEE802.3,IEEE802.3u,IEEE802.3ab Ethernet standards
> Provides 8 10/100/1000Mbps Auto-sensing RJ-45 ports and supports Auto MDI/MDIX
> Supports IEEE802.3x full-duplex flow control and half-duplex backpressure flow control
> Provides up to 16Gbps backplane bandwidth and supports non-blocking wire-speed forwarding
> Adopts store-and-forward switching, integrates an 8K MAC address table to meet diversified applications
> Equips with internal universal power supply for standard 9-inch rack
> Supports Port-based/Tag VLAN, Trunk, static MAC address stable, QoS
> Supports control over MAC address filtering and aging
> Supports broadcast control, support Port mirroring.
> Setting the IP address of the switch with under Static IP or DHCP client
> Supports software upgrading and configuration files backup and switch restoration
> Supports the cable diagnosis
> Supports data statistics
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p
> IP address for login: 192.168.0.1; Username: admin ; Password: admin ;
> Please make sure the switch is working normally and then press the RESET button
until the status of the SYS indicator changes in this way: Always ON - Flashing off.
At this time, you can release this button, and the Switch will restore the factory default
settings automatically. When the SYS indicator lights green again, this indicates you
have succeeded in restoring default settings.
Number of Ports
8 Port 10/100/1000Base-TX Auto-sensing and Auto MDI/MDIX
Flow control mode
IEEE 802.3x full-duplex flow control and back pressure flow control
LED status of Link, activity, Full/half duplex, speed, and power on diagnostic function
> 10Base-T: UTP category 3, 4,5 cable up to 100m
> 100Base-TX: UTP category 5 cable up to 100m
> 1000Base-Tx: 1000Base-Tx: CAT 5 UTP is recommended
230mm X 140mm X 44mm
9 inch Rack mountable
100～240V Internal Power
0℃ to 45℃
10% to 90%
-40℃ to 70℃
5% to 90% RH